Research & Development

Projet

MUTANC2

Shared anchors and mooring lines for offshore wind farms

Motivation & background

The market push to reduce levelized cost of energy (LCOE) of floating offshore wind farms introduces breakthrough innovations in farm design and technological challenges. A way to achieve cost reduction is by sharing anchors, and even more by sharing mooring lines between floating offshore wind turbines. The MUTANC project has studied shared pile anchors in sandy soil from 2021 to 2024 advocating a cost reduction from 16% to 30% for farms with 100 turbines. However, questions remain.

What recommendations can be established between shared anchor loadings and the design of piles in sandy soil?
Is it possible to design an efficient shared mooring line configuration while mitigating risks to integrity and production failure?
How do installation, operation, maintenance, and decommissioning challenges impact anchor costs and operational time, and how can they be integrated into an LCOE cost model?

Objectives

To provide a practical engineering methodology and design tools for industry practice, based on a thorough understanding of pile behavior in sand under horizontal cyclic and multidirectional loading
To explore the use of shared mooring line systems to ensure their integrity and prevent the potential impact of failure on production
To improve the cost model developed in the MUTANC project with installation and maintenance specificities impacting the cost and the operational availability

Scientific content

Shared anchors layout analysis

• Definition of site-specific anchor layout considering metocean directionality and redundancy in mooring lines
• Numerical simulations to perform and compare ultimate limit state (ULS) and accidental limit state (ALS) cases for shared and unshared configurations, and mooring configurations assessment through simplified cost considerations

Shared anchor geotechnical analysis and recommendations

• Experimental geotechnical analysis
• Calibration and validation of a complex geotechnical numerical model using finite element analysis (FEA) and advanced soil constitutive model
• Validation of a simplified soil constitutive model
• Development of a simplified tool for shared pile anchor engineering practice, including the definition of cyclic degradation factors
• Parametric study and analysis of specific cases and cyclic multidirectional stochastic loadings

Shared anchor design practice for certification

• Identification of applicable technical standards based on an overview of critical aspects for shared anchors
• Definition of a global design methodology for shared anchors
• Preparation of guidelines for certification

Shared mooring lines systems analysis

• Literature review of existing shared mooring line systems, case study specifications, and selection of designs
• Development of numerical models and application to specific shared mooring system arrays
• Validation of a shared mooring configuration through basin tests
• Risk assessment

Cost model including installation, operation, maintenance and decommissioning challenges

• Case study specifications
• Study of the impact of sharing on installation, operation, maintenance, and decommissioning scenarios
• Integration into MUTANC cost model

Expected results

Optimized mooring line configurations and redundancy strategies adapted to shared anchor systems
Advanced numerical tools and methodologies for shared mooring design, validated through physical testing
Development of degradation laws, simplified geotechnical models and recommendations for certification, applicable to industry, concerning the behaviour of driven piles in sandy soils under cyclic and multidirectional loadings
Definition of relevant installation scenarios for shared systems, detailing associated challenges and cost implications

Project sheet

Pitch vidéo

Webinaire

Rapports publics

Conclusion

Lorem ipsum dolor sit amet consectetur.

Sagittis maecenas aliquam integer lobortis eu dignissim blandit tellus metus. Amet et tristique malesuada mattis pharetra bibendum purus id. Risus in elit ullamcorper ut. Imperdiet amet id feugiat arcu malesuada at ut vulputate condimentum.

Partners

This project is led by France Energies Marines.

Funding

This project receives French State funding managed by the National Research Agency under the France 2030 investment plan (ANR-10-IEED-0006-34). It also receives financial support from the Bretagne, Pays de La Loire and SUD Provence-Alpes-Côte d’Azur regions.

Accreditation

This project is certified by the maritime clusters Pôle Mer Bretagne Atlantique and Pôle Mer Méditerranée.

MUTANC2

Motivation & background

Objectives

Scientific content

Shared anchors layout analysis

Shared anchor geotechnical analysis and recommendations

Shared anchor design practice for certification

Shared mooring lines systems analysis

Cost model including installation, operation, maintenance and decommissioning challenges

Expected results

Conclusion

Partners

Funding

Accreditation

Pour aller plus loin

Ajoutez votre titre ici

Ajoutez votre titre ici

Ajoutez votre titre ici

Would you like to know more ?

MUTANC2

Motivation & background

Objectives

Scientific content

Shared anchors layout analysis

Shared anchor geotechnical analysis and recommendations

Shared anchor design practice for certification

Shared mooring lines systems analysis

Cost model including installation, operation, maintenance and decommissioning challenges

Expected results

Conclusion

Partners

Funding

Accreditation

Pour aller plus loin

Ajoutez votre titre ici

Ajoutez votre titre ici

Ajoutez votre titre ici

Would you like to know more ?

This website uses cookies